CP1W-CIF11 RS485 Problem

Currently, RS422/485 option board for CP1 series with new lot no (eg: 29410S,17910S), not working in RS485 mode. I have test with two brand new items. So boring...

Omron Software Registration and Downloads

https://www.omron247.com/Industrial-Automation/Store/OmronDownloads_-1_10051_10051

CX-ONE V1.1 sn

9916-9901-0969-7602

CX-Supervisor

CX-Supervisor 2.0 Trial
http://rapidshare.com/files/99022317/Omron_CX-Supervisor_v2.0_Trial.part1.rar
http://rapidshare.com/files/99019286/Omron_CX-Supervisor_v2.0_Trial.part2.rar

Patch: http://rapidshare.com/files/101402793/cxdev.rar
Update: http://rapidshare.com/files/103987262/CX-Supervisor_update_2.1_15__and_2.11_2_.rar.html
s/n: 2001-0000-2070-8472


Run regedit. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\


Find CX-Supervisor.

Replace "Version"=dword:02000000 on "Version"=dword:020a0000

Run update 1.

Replace "Version"=dword:020a0000 on "Version"=dword:020b0000

Run update 2.

Only without SN runtime update.

See old, new1 and new2 reg files.

http://rapidshare.com/files/104536325/reg.rar.html

-------- trial 2.0 + update 2.1 ---------------


Resume:

1.Install trial 2.0

2. Run cx1.reg

3. Install update 2.1, Sn 2001-0000-2070-8472

4. Run scs.exe

Open project and message: "Software protection not found. External communication will be disabled."

Download http://rapidshare.com/files/104864957/patch2.1.exe.html

Place in folder CX-Supervisor and run.

Communication enable. Please testing. Only for version 2.1.


--------- update 2.11 ---------------

Sequential.

1.Install trial 2.0

2. Run cx11.reg

3. Install update 2.11

4. Sn 2001-0000-2070-8472

!!!! Only select Repair (is not Modify)!!!

5. Download http://rapidshare.com/files/104913325/patch2.11.exe.html

Run patch.

Please testing. I have is work on cx-simulator.

Enjoy!



http://depositfiles.com/files/5050815
http://depositfiles.com/files/5051544
http://depositfiles.com/files/5051955
http://depositfiles.com/files/5052412
http://depositfiles.com/files/5053029
http://depositfiles.com/files/5053293

CXP for CP1E V1.0 (Only support CP1E)

s/n: 9916-9922-0969-7145


(cxp for CPIE + simulator + serial)

http://rapidshare.com/files/361202410/CXP_for_CP1E_sim.part1.rar
http://rapidshare.com/files/361215706/CXP_for_CP1E_sim.part2.rar
http://rapidshare.com/files/361189865/CXP_for_CP1E_sim.part3.rar

Omron CX-Server OPC

cx-server opc 1.21 build 13
s/n: 7120-0100-0092-0097



cx-server opc 2.0
ftp://69.219.66.132/pub/CX-Server%20OPC/
s/n: 0100-0020-0156-0250

Omron PLC Training Documents

http://rapidshare.com/files/168251292/OMRON_Plc_Training.rar


http://narod.ru/disk/12168771000/OMRON_Plc_Training.rar.html

Work with hydraulic solenoid valve

With one solenoid (4/3), at normal status P to A&B.
Port A connect to the first hydraulic cylinder and port B connect to the second cylinder. Each cylinder has one pipe only. Cylinders are  used as clamps.

The question is how to control two cylinder in 4 cases:
1. Both cylinders extract.
2. One extracts, on retracts
3. Both cyllinders retract.


Let think and tell me know.

Omron H7BX counter

Different beetwen H7BR-BW & new model H7BX-AW.

H7BX has no batch output (pin 7 unused)

NC Machine Repair

Finally, after 3 days, I just finish repairing the NC machine with Omron position unit C200H-NC111.

1. Detect fault of some sensors (NC limit)
2. Correct position data

It's hard work.

Enjoy a cup of beer now!

HMI Protected

HMI Weinview has been protected too and don’t know way to release.

 

Re-programming is the best and fastest way

 

FATEK PLC FBS password

Up to now, no way to find out the password of FBs.

The best solution for this time is re-programming.

FATEK Password protected

I have made cable and try online but unsuccessful because password protection.

Now searching a software or way to unlock.

FATEK PLC - Upload program

The first time, I work to FATEK PLC (Taiwan). Software can be downloaded from manufacturer's website, but I don't find any where or how to upload program from PLC.


So sad!!!

Omron cable

Mitsubish programming cable made by myself

Cheap cable made by myself. I have practiced  in really project with FX PLCs (FX1N, FX2N, FX0S) and Shihlin. All work fine.

CX-ONE 4.0 now ready for sale in Vietnam

Support Softwares in CX-One Version 4.0
-------------------------------------------
CX-Programmer Ver.9.0
CX-Integrator Ver.2.4
Switch Box Utility Ver.1.6
CX-Protocol Ver.1.9
CX-Simulator Ver.1.9
CX-Position Ver.2.5
CX-Motion-NCF Ver.1.9
CX-Motion-MCH Ver.2.2
CX-Motion Ver.2.3
CX-Drive Ver.1.9
CX-Process Tool Ver.5.2
Faceplate Auto-Builder for NS Ver.3.1
CX-Designer Ver.3.1
NV-Designer Ver.1.1
CX-Configurator FDT Ver.1.1
CX-Thermo Ver.4.2
CX-FLnet Ver.1.0
Network Configurator Ver.3.1
CX-Server Ver.4.3
PLC Tools (Installed automatically.)

Easy way to connect CX-Programmer to Omron PLC

The first time you connect to Omron PLC, you confuse and don't know how to do?

That: port setting not default and you don't know the parameters.

Resolve in two cases:

Case 1. If port is not use: turn port to default setting (not effect to PLC operation)
  1.1. CPM2A: set the switch beside Hostlink (RS232) port to ON position
  1.2. CQM1/1H, C200Hx: set DIP switch 5 to ON (apply to both peripheral and RS232 port)
    CX-P: set Network Type to SYSWAY (9600,7,2,even)

  1.3. CS1/CJ1: set DIP switch 4 to ON for peripheral port or DIP switch 5 for RS232 port
    CX-P: set Network Type to Toolbus (auto baud-rate)

Case 2. If port is connected to HMI, Host computer or similar device: remove cable to this device and perfom the same case 1

After perfoming, remember set DIP and other to origin position.

In other cases, please contact the expert or me to resolve.

Cheers and good luck!

Motion Control Unit C200H-MC221

1. Must connect directly to this unit via a cable CV500-CIF01, impossible to connect through CS1 CPU

2. Upload parameters, Programs, Positons from MC Unit and then download again to a new MC (All files or program only), parameter ok but program not ok and occur error on CX-Motion

3. Resolution: I download Position data before Program.

Replace old inverter with the new one

Please check carefully when replace defected inverter with a new one, especially motor and mechanical factors.

Some inverters were destroyed, IGBT exploded due to over current and short circuit at power output and perhaps the product not good.

Inverter with up/down load

When a inverter operate with up/down load or cam, must use breaking resistor and the best way is external breaking unit.

 

Omron E3Z-B Photoelectric Sensor for Detecting Transparent PET Bottles

I forget this sensor need a reflector

Laser sensor - Omron and Keyence

Keyence LV-H32 series is similar to Omron E3C-LDA

KeyenceOmron

Omron mini PLC SP series programming cable

Mitsubishi FX and Proface GP cable

Mitsubishi FX programming cable

8 pin mini-DIN male port

Extension cable in the market:

1. Red   |   2. Violet   |  3. Green   |   4. Black  |   5. Yellow  |   6. Brown   |  7. Blue  |   8: Orange

Omron RS232 cable PLC 25-pin to PC 9-pin

Omron RS232 cable PLC 9-pin to PLC 9-pin

Omron RS232 cable PLC 9-pin to PC 9-pin

Adapter for C200H-CPUxx

Hostlink Interface: 3G2A6-LK201-V1
Hostlink Unit (RS232): C200H-LK201-V1
Hostlink Unit (RS422): C200H-LK202-V1
Peripheral Interface: C200H-IP007 (CPM1A port)

Omron Ultrasonic sensor E4PA Experience

After setting, if power on again and setting plug not available, the sensor will not work normally.

So must put setting plug in position T. 

Information address for this product: http://www.omron-ap.com/product_info/E4PA-N/index.asp

CPM1A Peripheral pinout

CPM2C Peripheral pin out

pdf attached file

New Product: NV4W

4.6-inch Monochrome STN HMI has been added to NV Series lineup!

Standards Certification: G3PE Solid State Relay

Standards certification information for Omron's new G3PE SSRs has been added:




G3PE (Single-phase) Solid State Relay



G3PE (Three-phase) Solid State Contactor

New Product: CP1E-NA

Omron introduces new CP1E Micro PLC application model with built-in analog I/O (two inputs and one output). Analog control and monitoring is possible with only a single CPU unit.

New Product: CX-One Version 4.0

Omron releases upgraded version (Version 4.0) of CX-One Integrated Tool Package, featuring easy input, easy designing and easy validation. A Smart Input function greatly reduces the work required to input programs.